H3C S9500 Series Operation Manual page 1446

Operation Manual – Information Center
H3C S9500 Series Routing Switches
Note:
The timestamp format of loghost information is not affected.
Perform the following configuration to configure the output format of time-stamp:
Configure the output
format of the time-stamp
Disable the output of
time-stamp
4) Enabling terminal display function
To view the output information at the console terminal, you must first enable the
corresponding log, debugging and trap information functions at the switch.
For example, if you have set the log information as the information sent to the console
terminal, now you need to use the terminal logging command to enable the terminal
display function of log information on the switch, then you can view the information at
the console terminal.
Perform the following configuration to enable terminal display function:
Enable terminal display
function of debugging
information
Disable terminal display
function of debugging
information
Enable terminal display
function of log information
Disable terminal display
function of log information
Enable terminal display
function of trap
information
Disable terminal display
function of trap
information
By default, the terminal display function of debugging information is disabled.
To do...
info-center timestamp
{ log | trap | debugging }
{ boot | date | none }
undo info-center
timestamp { log | trap |
debugging }
To do...
terminal debugging
undo terminal
debugging
terminal logging
undo terminal logging
terminal trapping
undo terminal trapping
Use the command...
Use the command...
1-14
Chapter 1 Information Center
Remarks
Available in system view
Available in system view
Remarks
Available in user view
Available in user view
Available in user view
Available in user view
Available in user view
Available in user view