H3C S9500 Series Operation Manual page 882

Operation Manual – MPLS VPLS
H3C S9500 Series Routing Switches
[NPE2-Ethernet2/1/15] traffic-redirect inbound link-group 4000 rule 1 slot 5
23
[NPE2-Ethernet2/1/15] quit
# Enable MPLS on public network interfaces.
[NPE2] interface vlan-interface 23
[NPE2-Vlan-interface23] mpls
[NPE2-Vlan-interface23] mpls ldp enable
[NPE2-Vlan-interface23] interface vlan-interface 12
[NPE2-Vlan-interface12] mpls
[NPE2-Vlan-interface12] mpls ldp enable
[NPE2-Vlan-interface12] interface vlan-interface 26
[NPE2-Vlan-interface26] mpls
[NPE2-Vlan-interface26] mpls ldp enable
# Configure MPLS LDP remote sessions.
[NPE2] mpls ldp remote-peer 1
[NPE2-mpls-remote1] remote-ip 1.1.1.1
[NPE2-mpls-remote1] quit
[NPE2] mpls ldp remote-peer 3
[NPE2-mpls-remote3] remote-ip 3.3.3.3
[NPE2-mpls-remote3] quit
[NPE2] mpls ldp remote-peer 6
[NPE2-mpls-remote6] remote-ip 6.6.6.6
# Configure the network VPN instance on the private network side.
[NPE2] mpls l2vpn
[NPE2] vsi Hvpls static
[NPE2-vsi-Hvpls] pwsignal ldp
[NPE2-vsi-Hvpls-ldp] vsi-id 1
[NPE2-vsi-Hvpls-ldp] peer 1.1.1.1
[NPE2-vsi-Hvpls-ldp] peer 6.6.6.6
[NPE2-vsi-Hvpls-ldp] peer 3.3.3.3 upe
[NPE2-vsi-Hvpls-ldp] quit
[NPE2-vsi-Hvpls] broadcast-restrain 100
[NPE2-vsi-Hvpls] bandwidth 1024000
[NPE2-vsi-Hvpls] quit
# Bind the VPLS instance to the private network interface.
[NPE2] vlan 3001
[NPE2-vlan3001] interface vlan-interface 3001
[NPE2-Vlan-interface3001] l2 binding vsi Hvpls access-mode ethernet
[NPE2-Vlan-interface3001] quit
1-31
Chapter 1 VPLS Configuration