Ssh Server Configuration Example - H3C S9500 Series Operation Manual

Operation Manual – SSH
H3C S9500 Series Routing Switches
Enable SSH debugging
Disable SSH debugging

1.5 SSH Server Configuration Example

I. Network requirements
As shown in
establishes a local connection with the switch (SSH server) to better guarantee the
security of exchanged information.
II. Network diagram
PC
SSH Client
Figure 1-3 Network diagram for SSH server
III. Configuration procedure
1) Generate the RSA key.
[H3C] rsa local-key-pair create
Note:
If the configuration for generating the local key has already been completed, skip this
step.
2) Set the user login authentication mode.
The following shows the configuration methods for both password authentication and
RSA public key authentication.
Password authentication.
# Create the local user client001, and set the authentication mode of the user interface
to AAA.
[H3C] user-interface vty 0 4
[H3C-ui-vty0-4] authentication-mode scheme
To do...
Figure 1-3, a PC (SSH client) running SSH 2.0-enabled client software
Switch
SSH Server
1-12
Chapter 1 SSH Terminal Service Configuration
Use the command...
debugging ssh server { vty
index | all }
undo debugging ssh server
{ vty index | all }
Remarks
Available in
user view