H3C S9500 Series Operation Manual page 1403

Operation Manual – Cluster Management
H3C S9500 Series Routing Switches
HGMP V2 manages the network made up of
HGMP V2 manages the network made up of
Middle - range and low - end Ethernet switches Middle -
S 2403 F S 2403 F
Figure 1-1 Diagram of a network that employs HGMP V1
Note:
An S3026/S2008/S2016/S2026/S2403F switch can either be an HGMP Client and
be under administration of a H3C S9500 series routing switch or be an HGMP
Server and administrate switches. But it cannot be both an HGMP Client and an
HGMP Server simultaneously in a network.
Currently, S9500 Series Switches support HGMP V1 as well as NDP in HGMP V2.
1.2 HGMP Server Configuration
This section covers these topics:
Enabling HGMP Server on a Management Device
Upgrading Software on a Switch through the Management Device
Saving Configuration Information about Connected Switches
Setting the State and Alias of a Switch
Configuring a Specific Low-End Switch through the Management Device
1.2.1 Enabling HGMP Server on a Management Device
Note:
The management device here refers to a switch, which administrates the switches
connected to it using HGMP V1.
low -
end Ethernet switches
range and
HGMP V 1 HGMP V 1
S 2026 B S 2026 B S 2008 B S 2008 B
Chapter 1 HGMP V1 Configuration
S 2016 B S 2016 B
1-2