Storage Device Operation - H3C S9500 Series Operation Manual

Operation Manual – File System Management
H3C S9500 Series Routing Switches
Execute the specified
batch file (system view)
Caution:
When you use the delete command without the unreserved option to delete a file, the
file is in fact saved in the recycle bin and still occupies some of the storage space. So,
frequent use of this command may results in insufficient storage space of the switch. In
this case, you should find out the unused files kept in the recycle bin and permanently
delete them with the reset recycle-bin command to reclaim the storage space.
Note:
The directory and file names on the switch have the following limitations:
The maximum length of a directory or file name is 56 characters.
The maximum length of a full path name (containing the device name, single
directory name and file name) is 136 characters.
The move command takes effect only when the source and destination files are in
the same device.

1.2.3 Storage Device Operation

The Switch supports compact flash (CF) card. After a CF card is inserted successfully,
you can use such common commands as dir, cd, copy, delete, move to perform
operations on the files in the card. You can also stop the CF card through a command
before removing it.
You may be making Write operation to the CF card while directly removing the CF card.
Therefore, the Switch provides a CF-removing command, thus ensuring security and
consistency of CF operation. That is, you must execute the umount command before
removing the CF card.
The system is capable of saving a log in the CF card. If the CF card is not partitioned, a
log file is saved under cf:/logfile by default. Otherwise, a log file is saved under
log:/logfile by default. The log file is named "logfileX.txt", where "X" is an integer in the
range of 1 to 5.
The log file is recorded in the CF card in text format. You can use the more command to
display the log file on the switch.
To do...
execute filename
Chapter 1 File System Management
Use the command...
1-3
Remarks
Available in user view