Printer Settings - Canon imagerunner advance C5550i User Manual

Printer Settings

◼
Software Specifications
Operating Modes
Resident Fonts
Printable Area
*1 Requires optional PCL INTERNATIONAL FONT SET-A1.
*2 Require optional BARCODE PRT KIT-D1.
Auto, PS, PCL, XPS, Imaging, and PDF
PCL:
93 Roman, 10 Bitmap fonts, 2 OCR fonts, Andalé Mono WT J/K/S/T
and Traditional Chinese) , Barcode fonts
PS:
136 Roman
PCL5c and PCL6:
Reduced to 4.2 mm from the top, bottom, left, and right edges of the paper.
PostScript 3:
Reduced to 4 mm from the top, bottom, left, and right edges of the paper.
When printing in the Expand Print Region and Print mode, the upper margin becomes 4 mm, the
lower margin becomes 2.5 mm, and the side margins both become 2.5 mm. The printable area is
enlarged.
When an original has data that extends all the way to the edges, even if you select [Expand Print
Region and Print], the periphery of the data may be cut off when printing. In this case, specify the
reduction ratio in the printer driver so that data is not cut off, and perform printing again.
Appendix
*2
1054
13WK-0H1
*1
(Japanese, Korean, Simplified