Internal View - Canon imagerunner advance C5550i User Manual

Hide thumbs Also See for imagerunner advance C5550i:

Table of Contents

The prints are output to this tray. You can specify functions for which the tray is used by configuring <Output

Tray Settings>.

Internal View

Booklet Finisher-Y1

Saddle stitcher unit (Booklet Finisher-Y1 only)

Pull out to remove jammed paper or clear a staple jam in the saddle stitcher unit, or to replace the staple

Punch waste tray (2/4 Hole Puncher Unit-A1/2/3 Hole Puncher Unit-A1/4 Hole

Puncher Unit-A1)

Pull out to discard punch waste.

For information on the paper sizes that can be used for Staple, Saddle Stitch, Hole Punch, and Saddle Fold,

Specifications(P. 1029) .

To replace the staple cartridge of the stapler unit or saddle stitcher unit, see

(Optional)(P. 851) .

For how to clear a paper jam or a staple jam, see

Jams (Optional)(P. 1007) .

The maximum number of bindable sheets may not be possible, depending on the paper type. In this case,

change the paper type, or reduce the number of sheets to bind.

Collate and group

If you select <Offset> in combination with the collate or group function, each printout group is shifted.

Once an output tray has reached its stacking limit, subsequent prints are automatically delivered to the next

available tray. If all of the available trays have reached their stacking limits, printing stops. Remove all of the

output paper from the trays to resume printing.

<Output Tray Settings>(P. 760)

Emptying the Punch Waste (Optional)(P. 863)

Staple Finisher-Y1

Clearing Paper Jams(P. 977) and

Replacing the Staples

Clearing Staple