Front Cover - Canon imagerunner advance C5550i User Manual

Auxiliary Tray
Pull out the auxiliary tray if you are outputting large size paper.
Output Tray
Paper is output to the output tray.
Staple Button
Press this button when you manually staple paper (Manual Stapling). You can also staple paper without
pressing the button. You can specify the time period for the paper to be stapled after inserting the paper.
<Adjust Action>
Slit
Insert paper to manually staple the paper. You can specify the time period for the paper to be stapled after
inserting the paper.
Punch waste tray (Inner 2/4 Hole Puncher-B1/Inner 2/3 Hole Puncher-B1)
Pull out to discard punch waste.

Front cover

Open to remove jammed paper, clear a staple jam in the stapler unit, or replace the staple cartridge.
● For information on the paper sizes that can be used for Staple and Hole Punch, see
Specifications(P. 1029) .
● To replace the staple cartridge of the stapler unit, see
● For how to clear a paper jam or a staple jam, see
Jams (Optional)(P. 1007) .
● The maximum number of bindable sheets may not be possible, depending on the paper type. In this case,
change the paper type, or reduce the number of sheets to bind.
Collate and group
● If you select <Offset> in combination with the collate or group function, each printout group is shifted.
Staplers
● When you are using the Staple mode, do not remove the stack of paper from the output tray during the job.
Remove the stack of paper when the job has been completed.
● If the <Load staples into the stapler unit.> message appears, almost all of the staples have been used. To
proceed, replace the staple cartridge.
● Output temporarily stops when the tray reaches the lowest position or when 30 sets have been stapled.
Printing resumes when you remove all of the paper that has been output.
Appendix
<Time Until Stapling Starts in Stapler Mode>(P. 756)
Emptying the Punch Waste (Optional)(P. 863)
Replacing the Staples (Optional)(P. 851) .
Clearing Paper Jams(P. 977) and
1105
Clearing Staple