The Cc Output Step - Teledyne T700 Operation Manual

Overview of Operating Modes and Basic Operation

4.3.2.8. The CC OUTPUT Step

Toggle this button
to turn the CC
output ON/OFF
Moves the
cursor one
character left or
right.
134
This instruction causes the sequence to set or reset the T700‟s digital control outputs. It
is very useful in situations where the control outputs are being used to trigger other
devices that need to be turned off and on in synch with the operation of the calibrator as
it progress through the sequence.
To insert a CC OUTPUT step into a sequence, press:
Starting at the STEPS Submenu
INSERT STEP Submenu
SETUP X.X INSERT STEP: GENERATE
PREV NEXT
Use the PREV and NEXT buttons to scroll though
the list of available instructions
SETUP X.X INSERT STEP: PURGE
SETUP X.X CC OUTPUT:DISABLED
<SET SET> EDIT
SETUP X.X CC OUTPUT ENABLE:OFF
OFF
SETUP X.X CC OUTPUT:[0]00000000000
<CH CH>
Toggle this button to turn the
selected bit ON/OFF
(0 or 1)
SETUP X.X 2) SET CC OUTPUT 000100010110
PREV NEXT
Teledyne API – Model T700 Dynamic Dilution Calibrator
ENTR
ENTR
ENTER EXIT
[0] ENTER
INS DEL EDIT
EXIT
EXIT
EXIT
EXIT discards the
new setting
ENTR accepts the
new setting
EXIT
EXIT
06873E DCN7106