Options; Table 1-1: Calibrator Options - Teledyne T700 Operation Manual

Introduction

1.3. OPTIONS

Table 1-1: Calibrator Options

Option
Option
Number
Flow Options
7A
7B
8A
8B
9
Calibration Options
1A
2A
5
73
Rack Mounting
20A
20B
21
20

Software linearization of Mass Flow Controllers (MFC)

4 calibration gas ports configurable for single or multi-blend gases
rd

Optional 3 MFC for wide dynamic range

Optional gas phase titration (GPT) chamber

Optional ozone generator and photometer to allow use as primary or transfer
standard

Inlets for external ozone reference sources
The options available for your analyzer are presented in Table 1-1 with name, option
number, a description and/or comments, and if applicable, cross-references to technical
details in this manual, such as setup and calibration. To order these options or to learn
more about them, please contact the Sales Department of Teledyne Advanced Pollution
Instruments at:
Description/Notes
For mass flow control (MFC)
Source MFC 0-50 CC/MIN (Replaces 0-100 CC/MIN)
Source MFC 0-200 CC/MIN (Replaces 0-100 CC/MIN)
Diluent MFC 0-5 SLPM (Replaces 0-10 SLPM)
Diluent MFC 0-20 SLPM (Replaces 0-10 SLPM)
Third MFC (Can only be on source)
Gas generators
Internal Ozone (O
3
Optical Feedback and GPT Mixing Chamber
UV Photometer Module (to increase accuracy of O
Generator, Option 1A)
Permeation Tube Oven
Dual Gas Output (NOy – special)
For mounting the analyzer in standard 19" racks
Rack mount brackets with 26 in. (660 mm) chassis slides
Rack mount brackets with 24 in. (610 mm) chassis slides
Rack mount brackets only
Teledyne API – Model T700 Dynamic Dilution Calibrator
TOLL-FREE: 800-324-5190
PHONE: +1 858-657-9800
FAX: +1 858-657-9816
EMAIL: apisales@teledyne.com
WEBSITE: http://www.teledyne-api.com/
) Generator with
Reference
Section 3.3.2.6
Section 3.3.2.6
3
Section 3.3.2.6
Section 3.3.3
Section 3.3.4
Figure 3-32
N/A
N/A
N/A
06873E DCN7106