Input/Output Panel - Teledyne LabMaster 10 Zi Series Getting Started Manual

LabMaster 10 Zi Oscilloscopes

Input/Output Panel

The available connections on I/O panels are the same for all LabMaster 10 Zi
configurations. I/O panels are located on the back of the Master Control
Module. See Back of MCM-Zi Master Control Module (on page 10) for more
information.
1. Mouse
2. Keyboard
3. Host USB Ports
NOTE: The MCM-Zi motherboard is a server-class motherboard with certain I/O
capabilities (serial port, VGA/WXGA video output) that are not utilized by the MCM-
Zi, even though the physical connectors remain on the I/O panel. The 9-pin serial
port is used for communication to the server motherboard, and the 15-pin video
connector only outputs text debug messages from the motherboard. Since these
capabilities are not useful for the MCM-Zi, they are disabled in the BIOS and will not
provide any I/O should you connect to them.
14
Number and Description
4. 9-pin Serial Port
(disabled)
5. 15-pin Video Output
(disabled)
6. Ethernet ports (LAN)
922561-00 Rev A