Turning The Test Channel Over-Range Feature On/Off - Teledyne T700 Operation Manual

Teledyne API – Model T700 Dynamic Dilution Calibrator

4.10.1.4. Turning the Test Channel Over-Range Feature ON/OFF

Toggle this
button to turn
the Over-
Range feature
ON/OFF
06873E DCN7106
In its default configuration, a ± 5% over-range is available on each of the T700‟s TEST
CHANNEL output. This over-range can be disabled if your recording device is
sensitive to excess voltage or current.
To turn the over-range feature on or off, press:
AIO CONFIGURATION SUBMENU
DIAG
PREV NEXT
DIAG AIO
SET>
Continue pressing SET> until you reach the
DIAG AIO
<SET SET>
DIAG AIO
SET>
DIAG AIO
<SET SET>
DIAG AIO
ON
DIAG AIO
OFF
Overview of Operating Modes and Basic Operation
From the
(See Section 6.9.1.1.)
ANALOG I/O CONFIGURATION
ENTR
AOUTS CALIBRATED: NO
CAL
output to be configured
TEST_OUTPUT: 5V, OVR, NOCAL
EDIT
TEST_OUTPUT: RANGE: 5V
EDIT
TEST_OUTPUT: OVERRANGE: ON
EDIT
TEST_OUTPUT: OVERRANGE: ON
TEST_OUTPUT: OVERRANGE: OFF
EXIT
EXIT
EXIT
EXIT
EXIT
ENTR EXIT
EXIT
ENTR
153