Setup > Pass; Table 4-11: Password Levels - Teledyne T700 Operation Manual

Teledyne API – Model T700 Dynamic Dilution Calibrator
4.6. SETUP > PASS

Table 4-11: Password Levels

PASSWORD LEVEL
No password Operator
101 Maintenance
818 Configuration
Toggle this
button to
enable, disable
password
feasture
06873E DCN7106
The T700 provides password protection of the calibration and setup functions to prevent
unauthorized adjustments. When the passwords have been enabled in the PASS menu
item, the system will prompt the user for a password anytime a password-protected
function is requested.
There are three levels of password protection, which correspond to operator,
maintenance and configuration functions.
functions in the previous level.
All functions of the MAIN menu: TEST, GEN, initiate SEQ , MSG, CLR
Access to Primary and Secondary Setup Menus except for VARS and DIAG
Secondary SETUP Submenus VARS and DIAG
To enable or disable passwords, press:
STANDBY A-CAL=0.000 LPM
<TST TST> GEN STBY SEQ
SETUP X.X
PRIMARY SETUP MENU
GAS SEQ CFG
SYSTEM
PASSWORD ENABLE: OFF
OFF
SETUP X.X
PASSWORD ENABLE: ON
ON
Overview of Operating Modes and Basic Operation
Each level allows access to all of the
MENU ACCESS ALLOWED
2 1
MSG CLR
CLK MORE
PASS
ENTR EXIT
ENTR EXIT
SETUP
EXIT
EXIT discards the new
setting
ENTR accepts the
new setting
141