Editing Or Deleting A Level - Teledyne T700 Operation Manual

Overview of Operating Modes and Basic Operation

4.11.5.5. Editing or Deleting a LEVEL

Make sure that the T700 is
in standby mode.
SETUP X.X DELETEL STEP?
YES NO
SETUP X.X 7) DURATION : 10.0 MIN
PREV NEXT INS
168
To edit or delete an existing LEVEL, press:
STANDBY A-CAL=0.000 LPM
<TST TST> GEN STBY SEQ
SETUP X.X
PRIMARY SETUP MENU
GAS SEQ CFG
LVL
SETUP X.X
[LEVEL ID] ) [Gas/Conc.], [Status Block Set]
INS
PREV NEXT
Continue pressing NEXT or PREV until until
LEVEL to be edited or deleted appears
SETUP X.X 7) PURGE
PREV NEXT INS
EDIT
DEL EXIT
Teledyne API – Model T700 Dynamic Dilution Calibrator
SETUP
CLK PASS MORE EXIT
PRNT EXIT
DEL EDIT
EXIT
DEL EDIT
Toggle these buttons
select the parameter
to be edited
 Level ID Number
 Action
 Status Block 1
 Status Block 2
SETUP X.X LEVEL NUMBER:12
<SET SET> EDIT
Press EDIT then follow the instructions for the
parameter (See Sections 6.11.3 through 6.11.5.4
and 6.11.6).
06873E DCN7106
EXIT