Table of Contents
Advertisement
HDO9000 High Definition Oscilloscopes Operator's Manual
Auxilliary Output
To output signal from the instrument to another device, connect a BNC cable from Aux Out to the
other device. Go to Utilities > Utilities Setup > Aux Output to
Language Selection
To change the language that appears on the touch screen:
1. Go to Utilities > Preference Setup > Preferences and make a Language selection.
2. Follow the prompt to restart the application.
To also change the language of the Windows operating system dialogs:
1. Choose File > Minimize to hide X-Stream and show the Windows Desktop.
2. From the Windows task bar, choose Start > Control Panel > Clock, Language and Region.
3. Under Region and Language select Change Display Language.
4. Touch the Install/Uninstall Languages button.
5. Select Install Language and Browse Computer or Network.
6. Touch the Browse button, navigate to D:\Lang Packs\ and select the language you want to
install. The available languages are: German, Spanish, French, Italian, and Japanese. Follow
the installer prompts.
7.
Reboot
after changing the language.
Note: Other language packs are available from Microsoft's website.
14
configure the
output.
Advertisement
Table of Contents
