Creating A Generate Level - Teledyne T700 Operation Manual

Overview of Operating Modes and Basic Operation

4.11.5.1. Creating a GENERATE LEVEL

Toggle these
buttons to set the
target
concentration.
Toggle these buttons to
set the target TOTAL
FLOW.
(Default = 2.000 LPM)
Toggle these buttons
until the designation of
the existing defined level
program is reached.
164
To create a LEVEL using the T700‟s AUTO generation function, press:
Starting at the CHOOSE ACTION Submenu
CHOOSE ACTION Submenu
SETUP X.X
ACTION TO PERFORM:GENERATE
PREV NEXT
SETUP X.X
Continue pressing this key until the desired
SETUP X.X GENERATE:0.0 PPB CO2
0 0 0
SETUP X.X GENERATE:0.0 PPB CO2
0 .0 0
SETUP X.X TOTAL FLOW = 2.000 LPM
0 2. 0
ENTR accepts the new gas flow rate
STANDBY
0 0
Teledyne API – Model T700 Dynamic Dilution Calibrator
ENTR
GENERATE:ZERO
ENTR
ZERO
gas type appears
CO2 ENTR EXIT
.0 PPB
0 PCT CO2
ENTR EXIT
0 0 ENTR EXIT
LEVEL:0
ENTR
EXIT
EXIT
Toggle this button to
scroll through the
available gas types (as
programmed during
initial setup.
Toggle this button
to to scroll through
the available units
of measure
EXIT discards the
new flow rate
EXIT discards the new
EXIT
LEVEL number
ENTR accepts the new
LEVEL number
06873E DCN7106