Static Operation Mode
The static operation modes include the following 4 modes:
� Constant Current (CC) Mode
� Constant Voltage (CV) Mode
� Constant Resistance (CR) Mode
� Constant Power (CP) Mode
Constant Current (CC) Mode
In CC mode, the electronic load will sink a current in accordance with the
programmed value regardless of the input voltage, as shown in Figure 2-1.
Figure 2-1 Voltage-Current Relationship in CC Mode
Operating Steps
1. Turn off the instrument, then as shown in Figure 2-2, connect the
DUT and the channel input terminals on the front panel of the
load.
Constant Current Mode
Figure 2-2
15