Table 4-9: Calibration Sequence Step Instruction - Teledyne T700 Operation Manual

Overview of Operating Modes and Basic Operation

Table 4-9: Calibration SEQUENCE Step Instruction

INSTRUCTION NAME
GENERATE
GPT
GPTPS
PURGE
DURATION
EXECSEQ
SETCCOUTPUT
MANUAL
116
Puts the instrument into GENERATE mode. Similar in operation and effect to the
GENERATE > AUTO function used at the front panel.
Initiates a Gas Phase Titration operation.
Initiates a Gas Phase Titration Preset procedure.
Puts the calibrator into PURGE mode.
Adds a period of time between the previous instruction and the next
Calls another sequence to be executed at this time. The calling sequence will
resume running when the called sequence is completed. Up to 5 levels of nested
sequences can be programmed.
Allows the sequence to activate the T700‟s digital control outputs. Similar to the CC
OUPUT attribute, but can be set and reset by individual steps.
Puts the instrument into GENERATE mode. Similar in operation and effect to the
GENERATE > MAN function used at the front panel.
Teledyne API – Model T700 Dynamic Dilution Calibrator
DESCRIPTION
06873E DCN7106