Parameter Overview; Factory Settings" Application - Siemens SINAMICS G180 Installation And Operating Instructions Manual

Description
3.3 Accessories
Install the resistors so that the perforated plate is on the bottom, top and the front sides. The
connection box can be provided on the left or the right side.
If you require several resistors for series or parallel connection, install the resistors next to
each other. This also applies for wall mounting.
3.3.4

Parameter overview

A more detailed overview of all parameters can be found in the "IMS" software or in the
parameterization guide. You can find both on the Internet (http://www.siemens.com).
3.3.5

"Factory settings" application

Saved device settings which have been made during the internal factory device inspection
can be found in this application. For example, these can be special data for the motor or also
a complete parameter configuration.
50
CAUTION
Incorrect parameter settings
If you parameterize the resistance data incorrectly, you can destroy the brake transistor
or the brake resistor which can result in injury to personnel.
Input the correct data in the inverter.
Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007