1234: Print Mode When Switching Paper Type; 1235: Fusing Temperature Range - Ricoh Pro C7500 Operator's Manual

High Quality is applied in DFE Setting
Setting Item
02: Press Rlr Temp: Clear/Special/03:
Press Rlr Temp: White04: Heat Roller Temp:
Metallic/05: Heat Roller Temp: Option
Pressure Roller Heater
Turns on the pressure heater inside the fusing unit while printing. You can enable it on some types of
media including clear film and label paper. (It is not available for plain paper, coated paper, and other
standard paper.)
Turning on the heater may improve the toner fixation.
Setting Item
06: Setting

1234: Print Mode When Switching Paper Type

Adjust the time to wait before switching paper in a mixed-paper job. Specifying [Productivity Priority]
improves productivity, but may degrade the fusing quality.
Setting Item
01: Setting

1235: Fusing Temperature Range

BW/FC/FCS
Under conditions below, set range of fusing start temperature.
B&W/FC/FC with S
HQ is not applied in DFE
Max. Value Min. Value
200 50
Off
On
Use Operator Adjustment Settings
Fusing Priority
Standard
Productivity Priority
12: Machine: Image Quality
Step Unit
1 Degree C
Values
Values
179