Installing The Hardware - Ricoh B064 Service Manual

Installing the Hardware

1. Replace the interface board [A] with the MLB Interface Board [B].
NOTE: This step is not necessary from the following Serial Numbers:
Part Number
B06417
B06419
B06422
B06424
B06426
B06427
B06428
B06429
B06469
2. Remove the 4P connector [C] for the HDD and connect it to CN319 on the MLB
Board.
3. Connect one end of the power interface harness [D] to the HDD connector, and
the other end to CN318 on the MLB Board.
SM
[B]
[A]
B110I201.WMF
Serial Number Part Number
J4235300054 B06517
J42304XXXXX B06519
J42304XXXXX B06522
L1283040001 B06524
7P10430001 B06526
J4230300409 B06527
J42304XXXXX B06528
J42304XXXXX B06529
J42304XXXXX B06569
1-55
COPY CONNECTOR KIT
B110I202.WMF
Serial Number
J4335300191
J43304XXXXX
J43304XXXXX
L1293040001
7P20430001
J43304XXXXX
J43304XXXXX
J43304XXXXX
J43304XXXXX
B064 Series/B140 Series/G126
[D]
[C]