Scpi Device Command Summary - Agilent Technologies 8712ET Programmer's Manual

NOTE
NOTE
Table 11-1
SUBSYSTEM COMMANDS
ABORt
SCPI Command Summary

SCPI Device Command Summary

SCPI Device Command Summary
This SCPI command reference is also available online. It is stored inside
your analyzer in electronic form. To use it, you must connect your
instrument to the network, and access it using your Web browser. See
the The LAN Interface User's Guide Supplement for details.
Throughout this chapter, the following conventions are used:
• Square brackets ([ ]) are used to enclose a keyword that is
optional or implied when programming the command; that is, the
instrument will process the command to have the same effect
whether the option node is omitted or not.
• Parameter types (< >) are distinguished by enclosing the type
name in angle brackets.
• A vertical bar (|) can be read as "or" and is used to separate
alternative parameter options.
• UPPER-case letters (as found in the command MODify, for example)
are used to indicate the short form of a given mnemonic. The
remaining lower-case letters are the rest of the long form mnemonic.
ABORt
FORM
command
only
11-4
DESCRIPTION
Aborts and resets the sweep in progress.
Programmer's Guide