Agilent Technologies 8712ET Programmer's Manual page 258

Table 11-23
SUBSYSTEM COMMANDS
SYSTem:COMMunicate:LAN:BOOTp
:TIMeout
#1~MAX_AUTO_CAL_TIME[S]#
SYSTem:COMMunicate:LAN:BOOTp
:TRANsfer:FILE:NAME <string>
SYSTem:COMMunicate:LAN:BOOTp
:TRANsfer:FTP:PASSword-?
<string>
SYSTem:COMMunicate:LAN:BOOTp
:TRANsfer:FTP:USERname
<string>
SYSTem:COMMunicate:LAN:BOOTp
:TRANsfer:METHod <TFTP|FTP>
SYSTem:COMMunicate:LAN:EADDres
s?
SYSTem:COMMunicate:LAN:IPADdre
ss <string>
SYSTem:COMMunicate:LAN:LOGin
:USER:ADD-? <string>,<string>
SYSTem:COMMunicate:LAN:LOGin
:USER:DELETE-?
<string>,<string>
SYSTem:COMMunicate:LAN:LOGin
:USER:LIST:COUNt?
SYSTem:COMMunicate:LAN:LOGin
:USER:LIST:NAME? #1-7
SYSTem:COMMunicate:LAN:NFS
:AUTHentiation:ID:GROup
#0~4.74836e+07#
SCPI Command Summary
SCPI Device Command Summary
SYSTem (2 of 8)
11-60
FORM
NR1 Sets the number of seconds the
analyzer will retry the BOOTP
requests at boot time.
STRING Sets the path file name of the boot
file you want to receive at boot
time.
command Selects the password of the remote
only BOOTP host.
STRING Selects the user name of the
remote BOOTP host.
NR1 Selects TFTP as the file transfer
program.
query only Queries the analyzer's ethernet
STRING address.
STRING Sets the analyzer's Internet
Protocol address.
command Selects the login user/password
only pairs.
command Deletes the login user/password
only pairs.
query only Queries login user names.
NR1
query only Queries user name.
STRING
NR2 Selects the NFS remote file system
for entering a Group ID.
DESCRIPTION
Programmer's Guide