Agilent Technologies 8712ET Programmer's Manual page 146

Table 10-4
KEYSTROKES
(Transmissn) (continued)
CAL,
User 2-Port
Default 2-Port
User 2-Port
Measure Standard
Isolation on OFF
Normalize on OFF
More Cal
(see Table 10-11 on page
See Table 10-11 on page 10-30
See Table 10-7 on page 10-22
See Table 10-8 on page 10-23
See Table 10-9 on page 10-24
1. Pressing this softkey begins a guided 2-port calibration procedure, using seven
standards. When the calibration is complete, the command *WAI;:SENS[1|2]
:CORR:COLL:SAVE;*WAI is executed. The order of appearance and the content of
the softkey menus depend on the measurement channel 1 and measurement chan-
nel 2 configurations.
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
, Functions, 8712ES and 8714ES (3 of 3)
CAL
SENS[1|2]:CORR:CLASS DEF2; *WAI
SENS[1|2]:CORR:CLASS DEF2; *WAI
SENS[1|2]:CORR:COLL:IST OFF;METH TWOP;
*WAI
1
SENS[1|2]:CORR:COLL STAN[1|2|...|7];*WAI
SENS[1|2]:ISOL [ON|OFF];*WAI
TRAC CH[1|2]SMEM,CH[1|2]SDATA;:CALC[1|2]:
MATH (IMPL/CH[1|2]SMEM);:DISP:WIND[1|2]:
TRAC[1|2] ON;TRAC[1|2] OFF
(menu selection only)
10-26)
for Test Set calibration.
for Fault Location calibration.
for SRL calibration.
for Power or Conversion Loss calibration.
10-18
SCPI COMMAND
Programmer's Guide