Agilent Technologies 8712ET Programmer's Manual page 131

Figure 10-1
Table 10-8
KEYSTROKES
(Reflection)
CAL
Default 1-Port
Default 2-Port
User 1-Port
Softkey
Channel configuration
Hardkey
Entering Frequency, Power, and Other Numeric Values
Entry of frequency, power, and other numeric values requires a choice of
measurement unit. All entries of this type follow the same sequence:
Enter the number then choose the appropriate unit, or press
default units.
Menu Map Tables and Instrument Types
The instrument displays menu choices based on the instrument type and
the active measurement channel configuration. In the tables of softkey
menu choices that follow, the instrument type is shown in the table title,
and the channel configuration is shown in the table body. See
10-1, below.
Example Menu Map Table
Functions, 8712ES/8714ES
CAL
Programmer's Guide
SCPI COMMAND
(hardkey entry)
SENS[1|2]:CORR:CSET DEF; *WAI
SENS[1|2]:CORR:CLASS DEF2; *WAI
SENS[1|2]:CORR:CLASS DEF1; *WAI
SENS[1|2]:CORR:CSET DEF; *WAI
Applicable models
Menu Map with SCPI Commands
Enter
Figure
SCPI command
for
10-3