Agilent Technologies 8712ET Programmer's Manual page 101

Unless otherwise specified, the graphics commands listed below start at
the current pen location. All sizes are dimensioned in pixels.
DISPlay:WINDow[1|2|10]:GRAPhics:CIRCle <y_radius>
DISPlay:WINDow[1|2|10]:GRAPhics:CLEar
DISPlay:WINDow[1|2|10]:GRAPhics:COLor <pen>
• color choices are: 0 for erase, 1 for bright, 2 for dim
DISPlay:WINDow[1|2|10]:GRAPhics[:DRAW] <new_x>,<new_y>
DISPlay:WINDow[1|2|10]:GRAPhics:LABel <string>
DISPlay:WINDow[1|2|10]:GRAPhics:LABel:FONT <font>
• font choices are: SMALl, HSMall, NORMal, HNORmal, BOLD, HBOLd,
SLANt, HSLant (H as the first letter of the font name indicates
highlighted text – inverse video).
DISPlay:WINDow[1|2|10]:GRAPhics:MOVE <new_x>,<new_y>
DISPlay:WINDow[1|2|10]:GRAPhics:RECTangle
<width>,<height>
DISPlay:WINDow[1|2|10]:GRAPhics:SCALe
<xmin>,<xmax>,<ymin>,<ymax>
DISPlay:WINDow[1|2|10]:GRAPhics:STATe?
Programmer's Guide
Using Graphics
Introduction
7-3