Agilent Technologies 8712ET Programmer's Manual page 239

Table 11-19
SUBSYSTEM COMMANDS
SENSe[1|2]:CORRection:CLASs
[:SELect]?
SENSe[1|2]:CORRection:CLASs
[:SELect] <item>
DEFault1
DEFault2
REFLection3*
TRANsmission1*
TRANsmission2*
TRANsmission3*
TESTset1
TWOPort*
calibration
* The requested user calibration may or may not be stored in memory, and
may or may not be valid for the current instrument settings. If the requested
user calibration is invalid, a valid user calibration will be selected, if found.
If no valid user calibration is found, the default factory calibration will be
selected. The instrument can be queried with
SENSe[1|2]:CORRection:CLASs[:SELect]? to determine the current
calibration choice.
SENSe[1|2]:CORRection:COLLect
:ABORt
SENSe (4 of 16)
Programmer's Guide
FORM
CHAR Returns the current calibration
choice. Returns string from the
<item> list (below). (ES models only)
command Selects an existing calibration from
only the following <item> list:
Default factory one-port calibration
Default factory two-port calibration
User one-port calibration
User response calibration
User response and isolation calibration
User enhanced response calibration
Multi-port testset calibration
User two-port calibration Multi-port testset
command Aborts the calibration that is
only currently in progress.
SCPI Command Summary
SCPI Device Command Summary
DESCRIPTION
11-41