Agilent Technologies 8712ET Programmer's Manual page 232

Table 11-15
SUBSYSTEM COMMANDS
OUTPut[:STATe] <ON|OFF>
1. Binary parameters accept the values of 1 (on) and 0 (off) in addition to ON and OFF.
Table 11-16
SUBSYSTEM COMMANDS
POWer[1|2]:MODE <char>
SCPI Command Summary
SCPI Device Command Summary
OUTPut
1
POWer
11-34
FORM
NR1 Turns RF power from the source
on/off.
FORM
CHAR Specifies either frequency sweep
(FIXed) or power sweep (SWEep).
DESCRIPTION
DESCRIPTION
Programmer's Guide