Agilent Technologies 8712ET Programmer's Manual page 144

Table 10-4
KEYSTROKES
(Reflection)
CAL,
Default 1-Port
Default 2-Port
User 1-Port
Default 1-Port
User 1-Port
Measure Standard
User 2-Port
Default 2-Port
User 2-Port
Measure Standard
Isolation on OFF
Normalize on OFF
(see Table
More Cal
1. Pressing this key begins a guided calibration procedure using three standards.
When the calibration is complete, the command *WAI;:SENS[1|2]:CORR:COLL:
SAVE;*WAI is executed. The order of appearance and the content of the softkey
menus depend on the measurement channel 1 and measurement channel 2 configu-
rations.
2. Pressing this softkey begins a guided 2-port calibration procedure, using seven
standards. When the calibration is complete, the command *WAI;:SENS[1|2]
:CORR:COLL:SAVE;*WAI is executed. The order of appearance and the content of
the softkey menus depend on the measurement channel 1 and measurement chan-
nel 2 configurations.
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Functions, 8712ES and 8714ES (1 of 3)
CAL
(hardkey entry)
SENS[1|2]:CORR:CSET DEF; *WAI
SENS[1|2]:CORR:CLASS DEF2; *WAI
SENS[1|2]:CORR:CLASS DEF1; *WAI
SENS[1|2]:CORR:CSET DEF; *WAI
SENS[1|2]:CORR:COLL:IST OFF;METH REFL3;
*WAI
1
SENS[1|2]:CORR:COLL STAN[1|2|3];*WAI
SENS[1|2]:CORR:CLASS DEF2; *WAI
SENS[1|2]:CORR:CLASS DEF2; *WAI
SENS[1|2]:CORR:COLL:IST OFF;METH TWOP;
*WAI
2
SENS[1|2]:CORR:COLL STAN[1|2|...|7];*WAI
SENS:CORR:ISOL ON; *WAI
TRAC CH[1|2]SMEM,CH[1|2]SDATA;:CALC[1|2]:
MATH (IMPL/CH[1|2]SMEM);:DISP:WIND[1|2]:
TRAC[1|2] ON;TRAC[1|2] OFF
10-11) (menu selection only)
10-16
SCPI COMMAND
Programmer's Guide