Agilent Technologies 8712ET Programmer's Manual page 215

Table 11-6
SUBSYSTEM COMMANDS
DIAGnostic:PORT:READ?
<port><register>
DIAGnostic:PORT:WRITE
<port><register>
DIAGnostic:SNUMber <string>?
DIAGnostic:SPUR:METHod
<NONE|DITHer|AVOid>
1. Refer to "Controlling Peripherals" in Chapter 7 of the User's Guide for more infor-
mation on using this command. See also
page 11-19.
2. See "Controlling Peripherals" in Chapter 7 of the User's Guide for more information
on using this command. See also
page 11-19.
DIAGnostic (4 of 4)
1
2
Table 11-7 on page 11-18
Programmer's Guide
SCPI Device Command Summary
FORM
query Reads the rear panel I/O ports.
only
NR1,
NR1
NR1, Writes to the rear panel I/O ports.
NR1,
NR1
query Queries the instrument's serial
only number.
STRING
NR1 Selects the spur avoid mode.
Table 11-7 on page 11-18
and
SCPI Command Summary
DESCRIPTION
and Table 11-8 on
Table 11-8 on
11-17