Agilent Technologies 8712ET Programmer's Manual page 220

Table 11-9
SUBSYSTEM COMMANDS
DISPlay:ANNotation:MESSage:AOFF
DISPlay:ANNotation:MESSage
1
:CLEar
DISPlay:ANNotation:MESSage
:DATA <string>
DISPlay:ANNotation:MESSage
:STATe <ON|OFF>
DISPlay:ANNotation:TITLe[1|2]
1
:DATA <string>
DISPlay:ANNotation:TITLe[:STATe]
1
<ON|OFF>
DISPlay:ANNotation:YAXis:MODE
<char>
DISPlay:ANNotation:YAXis[:STATe]
2
<ON|OFF>
DISPlay:CMAP:COLor[1|2|...16]
:GREYscale <num>
1. Refer to "Operator Interaction" in Chapter 7 of the User's Guide for more informa-
tion on using this command.
2. Binary parameters accept the values of 1 (on) and 0 (off) in addition to ON and OFF.
SCPI Command Summary
SCPI Device Command Summary
DISPlay (3 of 7)
1
1
11-22
FORM
command Turns off any currently showing
only message window — includes
message window, active entry
and IBASIC window.
command Removes a user-defined pop-up
only message window.
STRING Displays a user-defined message
in the pop-up message window.
Optional argument specifies the
timeout: choose from
NONE|SHORt|MEDium|LONG.
NR1 Enables/disables the message
window — CAUTION: this
suppresses display of all
messages (even ERROR
messages).
STRING Enters a string for the specified
title line.
NR1 Turns on/off display of the title
and clock.
CHAR Sets mode for the Y-axis labels —
choose RELative or ABSolute
NR1 Turns on/off Y-axis labels.
NR2 Changes the default intensity of
the selected item on the
analyzer's internal monitor.
DESCRIPTION
Programmer's Guide