Agilent Technologies 8712ET Programmer's Manual page 261

Table 11-23
SUBSYSTEM COMMANDS
SYSTem:COMMunicate:SERial
:TRANsmit:BAUD <num>
SYSTem:COMMunicate:SERial
:TRANsmit:HANDshake <char>
SYSTem:COMMunicate:TTL:USER:
FEED <char>
SYSTem:DATE
<num1>,<num2>,<num3>
1
SYSTem:ERRor?
SYSTem:KEY <char>
1. For more information on errors, refer to
2. A list analyzer front panel key codes is provided in
codes."
SYSTem (5 of 8)
Programmer's Guide
FORM
NR1 Sets the baud rate for hardcopy
output to a device on the serial port
— choose from
1200|2400|4800|9600|19200.
CHAR Sets the handshake for
communication to a hardcopy device
on the serial port — choose XON or
DTR.
CHAR Selects the function of the USER
TTL IN/OUT port on the rear panel
of the analyzer. Choose from
DEFault|KEY|SWEep.
NR1, Sets the year (num1), month (num2)
NR1, and day (num3) of the real time
NR1 clock.
query Queries the error queue — returns
only the error number and message.
NR1,
STRING
command Sends key names
only the same functions as front panel
keys.
Chapter 13, "SCPI Error Messages."
Chapter 8, "Front Panel Key-
SCPI Command Summary
SCPI Device Command Summary
DESCRIPTION
2
which execute
11-63