Error Coefficient Arrays - Agilent Technologies 8712ET Programmer's Manual

Table 6-5
Selected Measurement
Transmission (B/R) Response
Transmission (B/R) Response & Isolation
Transmission (B/R) Enhanced Response
Reflection (A/R)
Broadband Internal
NOTE
Error Coefficient Arrays
The error coefficient arrays are either default values or are created
during a measurement calibration. These are used whenever correction
is on. They contain complex number pairs, are accessible via GPIB, and
are referenced as CH[1|2]SCORR1, CH[1|2]SCORR2, CH[1|2]SCORR3
and CH[1|2]SCORR4.
Error Coefficient Arrays
These arrays do not apply to Broadband External measurements.
Programmer's Guide
Internal Measurement Arrays
Error Coefficient Arrays
CH[1|2]SCORR1 Tracking
CH[1|2]SCORR1 Tracking
CH[1|2]SCORR2 Isolation Term
CH[1|2]SCORR1 Directivity
CH[1|2]SCORR2 Source Match
CH[1|2]SCORR3 Reflection Tracking
CH[1|2]SCORR4 Transmission Tracking
CH[1|2]SCORR1 Directivity
CH[1|2]SCORR2 Source Match
CH[1|2]SCORR3 Tracking
CH[1|2]SCORR1 R* Response
Trace Data Transfers
6-23