Agilent Technologies 8712ET Programmer's Manual page 264

Table 11-24
SUBSYSTEM COMMANDS
TEST:RESult?
TEST:SELect <num>
TEST:STATe <char>
TEST:VALue <num>
SCPI Command Summary
SCPI Device Command Summary
SYSTem (8 of 8)
11-66
FORM
query Queries the result of the selected
only adjustment or self-test — the
CHAR response will be
NULL|PASS|FAIL.
NR1 Selects the adjustment or self-test
to execute.
CHAR Selects the state of the active
adjustment or self-test — choose
from RUN|CONTinue|STOP for
the command. Query returns
NULL|RUN|PAUS|DONE.
NR1 Sets or queries a value for an
adjustment or self-test.
DESCRIPTION
Programmer's Guide