Agilent Technologies 8712ET Programmer's Manual page 143

Table 10-3
KEYSTROKES
BEGIN, Cable, 1,2
(continued)
, (continued)
SRL
Connector Model
Measure Connector
Connector Length
Connector C
Z Cutoff Frequency
Auto Z ON off
Manual Z
Connector Fault
SRL Cable Scan
Number of Points
Autost
User Begin on OFF
1. The active measurement channel configuration determines the order of appearance
and the content of the softkey menus.
2. Option 100 (SRL and Fault Location) only.
Functions, 8712ES and 8714ES (3 of 3)
BEGIN
Programmer's Guide
Menu Map for 8712ET/ES and 8714ET/ES
SCPI COMMAND
(menu selection only)
SENS[1|2]:CORR:MODEL:CONN
SENS[1|2]:CORR:LENG:CONN <num>
SENS[1|2]:CORR:CAP:CONN <num>
SENS:FREQ:ZST <num>
SENS1:FUNC:SRL:MODE [MANUAL|AUTO]
SENS1:FUNC:SRL:IMP <num>
SENS1:FUNC:FAULT:CONN; *WAI
SENS[1|2]:FUNC:SRL:SCAN; *WAI
SENS[1|2]:SWE:POIN <num>;*WAI
(menu selection only)
(menu selection only)
Menu Map with SCPI Commands
10-15