Agilent Technologies 8712ET Programmer's Manual page 207

Table 11-2
SUBSYSTEM COMMANDS
CALCulate[1|2]:MARKer
:FUNCtion:RESult?
CALCulate[1|2]:MARKer
:FUNCtion[:SELect] <char>
CALCulate[1|2]:MARKer
:FUNCtion:TRACking
1
<ON|OFF>
CALCulate[1|2]:MARKer
[1|2|8]:GDELay?
CALCulate[1|2]:MARKer
[1|2|8]:MAXimum
CALCulate[1|2]:MARKer
[1|2|8]:MAXimum:LEFT
1. Binary parameters accept the values of 1 (on) and 0 (off) in addition to ON and OFF.
CALCulate (5 of 7)
query
only
NR3
[,NR3,
NR3,
NR3]
CHAR
NR1
query
only
command
only
command
only
Programmer's Guide
FORM
Queries the results of the active marker
function — MAX and MIN return the
amplitude; TARG returns the frequency;
BWID returns bandwidth, center
frequency, Q and loss; STAT returns the
frequency span, the mean and standard
deviation of the amplitude response,
and the peak-to-peak ripple; FLAT
returns the frequency span, gain, slope
and flatness; and FSTAT returns the
insertion loss and peak-to-peak ripple of
the passband of a filter, as well as the
maximum signal amplitude in the
stopband. Refer to the MARKERS
example program in the Example
Programs Guide for more information.
Selects the active marker function —
choose from
OFF|MAXimum|MINimum|TARGet
|BWIDth|NOTCh|MPEak|MNOTch
|STATistics|
FLATness|FSTATistics.
Turn marker function tracking on/off.
Returns the group delay value, in
seconds, at the specified marker.
Sets the specified marker to the
maximum value on the trace.
Moves the specified marker to the next
local maximum to the left.
SCPI Command Summary
SCPI Device Command Summary
DESCRIPTION
11-9