Agilent Technologies 8712ET Programmer's Manual page 163

Table 10-12
KEYSTROKES
1
,
DISPLAY Color Options
2
Custom Colors
Select Item
Hue
Saturation
Luminance
Int Disp Intensity
Annotation Options
Meas Annot ON off
Freq Annot ON off
Mkr Annot ON off
Mkr Number ON off
Y-Axis Lbl ON off
Y-Axis Lbl rel ABS
Graticule ON off
1. The active measurement channel configuration determines the order of appearance
and the content of the softkey menus.
2. First choose an item (Background=1, User Graphics Pen 1=2 through User Graph-
ics Pen 7=8, Inactive Text=9, Warning Text=10, Graticule=11, Trace 1=12, Mem
1=13, Trace 2=14, Mem 2=15, Text=16) with
change, and enter a new value. The softkey menu displays
to save your changes.
Enter
3. COL[1|2|...|16] selects one of the 16 items listed in
h,s,l sets the hue, saturation and luminance values, respectively.
Functions, 8712ET/ES and 8714ET/ES (5 of 5)
DISPLAY
, (continued)
(menu selection only)
(select item, 1-16)
DISP:CMAP:COL[1|2|...|16]:HSL h,s,l
DISP:CMAP:COL[1|2|...|16]:HSL h,s,l
DISP:CMAP:COL[1|2|...|16]:HSL h,s,l
DISP:CMAP:COL16:GREY [0-1.00]
(menu selection only)
DISP:ANN:CHAN[1|2] [ON|OFF]
DISP:ANN:FREQ[1|2] [ON|OFF]
DISP:ANN:MARK[1|2] [ON|OFF]
DISP:ANN:MARK[1|2]:NUMB [ON|OFF]
DISP:ANN:YAX [ON|OFF]
DISP:ANN:YAX:MODE [REL|ABS]
DISP:WIND1:TRAC:GRAT:GRID [ON|OFF]
Programmer's Guide
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
SCPI COMMAND
, then choose a color item to
Select Item
and
Enter
Footnote
3
3
3
. Press
Cancel
2, above. HSL
10-35