Agilent Technologies 8712ET Programmer's Manual page 204

Table 11-2
SUBSYSTEM COMMANDS
CALCulate[1|2]:LIMit:DISPlay
1
<ON|OFF>
CALCulate[1|2]:LIMit:MARKer
:FLATness:MAXimum <num>
CALCulate[1|2]:LIMit:MARKer
:FLATness:MINimum <num>
CALCulate[1|2]:LIMit:MARKer
:FLATness:STATe <ON|OFF>
CALCulate[1|2]:LIMit:MARKer
:FREQuency:MAXimum <num>
CALCulate[1|2]:LIMit:MARKer
:FREQuency:MINimum <num>
CALCulate[1|2]:LIMit:MARKer
:FREQuency [:STATe] <ON|OFF>
CALCulate[1|2]:LIMit:MARKer
:STATistic:MEAN:MAXimum <num>
CALCulate[1|2]:LIMit:MARKer
:STATistic:MEAN:MINimum <num>
CALCulate[1|2]:LIMit:MARKer
:STATistic:MEAN:STATe
1
<ON|OFF>
CALCulate[1|2]:LIMit:MARKer
:STATistic:PEAK:MAXimum <num>
CALCulate[1|2]:LIMit:MARKer
:STATistic:PEAK:MINimum <num>
1. Binary parameters accept the values of 1 (on) and 0 (off) in addition to ON and OFF.
2. Numeric parameters may include an appropriate suffix; if no suffix is included, the
default (HZ for frequency or S for time) is assumed.
SCPI Command Summary
SCPI Device Command Summary
CALCulate (2 of 7)
1
2
2
1
11-6
FORM
NR1 Turns display of limit lines on/off.
NR3 Sets the maximum value for a flatness
limit test.
NR3 Sets the minimum value for a flatness
marker limit test.
NR1 Turns flatness marker limit test
on/off.
NR3 Sets the maximum value for delta
frequency marker limit test.
NR3 Sets the minimum value for delta
frequency marker limit test.
NR1 Turns delta frequency marker limit
testing on or off.
NR3 Sets the maximum value for a statistic
mean limit test.
NR3 Sets the minimum value for a statistic
mean limit test.
NR1 Turn statistic mean marker limit test
on/off.
NR3 Sets the maximum value for a statistic
peak-to-peak limit test.
NR3 Sets the minimum value for a statistic
peak-to-peak limit test.
DESCRIPTION
Programmer's Guide