Agilent Technologies 8712ET Programmer's Manual page 238

Table 11-19
SUBSYSTEM COMMANDS
SENSe[1|2]:CORRection:CKIT:OPEN
:MODify:LOSS? #0~1e+12#
SENSe[1|2]:CORRection:CKIT:OPEN
:MODify:ZOFFset? #25~100[OHM]#
SENSe[1|2]:CORRection:CKIT:PRESet
[:IMMediate]-?
[<KIT1|KIT2|...|KIT10>]
SENSe[1|2]:CORRection:CKIT:SAVE?
<KIT1|KIT2|...|KIT10>
SENSe[1|2]:CORRection:CKIT:SHORt
:MODify:DELay? #0~1e-06[S]#
SENSe[1|2]:CORRection:CKIT:SHORt
:MODify:LOSS? #0~1e+12#
SENSe[1|2]:CORRection:CKIT:SHORt
:MODify:ZOFFset? #25~100[OHM]#
SENSe[1|2]:CORRection:CKIT:THRU
:MODify:DELay? #0~1e-06[S]#
SENSe[1|2]:CORRection:CKIT:THRU
:MODify:LOSS? #0~1e+12#
SENSe[1|2]:CORRection:CKIT:THRU
:MODify:ZOFFset? #25~100[OHM]#
SCPI Command Summary
SCPI Device Command Summary
SENSe (3 of 16)
11-40
FORM
NR3 Modifies or queries the cal kit
open standard offset loss value.
NR3 Modifies or queries the cal kit
open standard offset
impedance value.
Command Sets all values of all
Only user-defined cal kits to the
default values.
CHAR Saves the user-defined cal kit
or queries whether the selected
user-defined cal kit has been
saved.
Modifies or queries the cal kit
NR3
short standard offset delay
time.
NR3 Modifies or queries the cal kit
short standard offset loss
value.
Modifies or queries the cal kit
NR1
short standard offset
impedance value.
NR3 Modifies or queries the cal kit
thru standard offset delay
time.
NR3 Modifies or queries the cal kit
thru standard offset loss value.
NR3 Modifies or queries the cal kit
thru standard offset impedance
value.
DESCRIPTION
Programmer's Guide