Agilent Technologies 8712ET Programmer's Manual page 229

Table 11-14
SUBSYSTEM COMMANDS
MMEMory:CATalog?<string>
MMEMory:CDIRectory <string>
MMEMory:COPY <string1>,
1, 2
<string2>
MMEMory:DELete <string>
MMEMory:INITialize
[<string>[,<char>[,<num>]]]
MMEMory:LOAD:STATe 1, <string>
MMEMory:LOAD:CKIT:USER[:SELect]
<KIT1|KIT2...KIT10>
MMEMory:FILE:INFO?<string>
MMEMory:MDIRectory <string>
1. Filenames may include the mass storage device — MEM: (internal non-volatile memory), RAM: (internal
volatile memory), INT: (internal 3.5 disk drive) or NFS local path. Wildcards ? and * may be used.
2. Be sure to catalog the desired disk using MMEM:MSIS before using this command.
3. Refer to "Automated Measurement Setup and Control" in Chapter 7 of the User's Guide for more infor-
mation on using this command.
MMEMory (1 of 3)
1
1, 2
1, 3
1
2
Programmer's Guide
SCPI Device Command Summary
FORM
query Lists the names of the files in
only memory.
STRING (a directory listing, file names
only.)
STRING Changes the current directory on
a DOS formatted disk — new
directory must be on the same
mass storage device.
command Copies a file — string1 is the
only source file, string2 is the
destination file.
command Deletes a file — string is the
only filename.
command Formats a disk — string is the
only mass storage device MEM:
(internal memory), or INT:
(internal floppy disk). Disk
format char is DOS, and the
interleave factor num.
command Recalls an instrument state from
only mass storage — string is the
filename.
command Recalls a user cal kit.
only
query Returns file information such as
only date/time.
STRING (a directory listing, file names
and more info.)
command Makes a new directory on a DOS
only formatted disk.
SCPI Command Summary
DESCRIPTION
11-31