Table 10-12
KEYSTROKES
1
,
, (continued)
DISPLAY
Limit Menu
(continued)
Add Limit
Add Min Line
Begin Frequency
End Frequency
Begin Limit
End Limit
Marker
Add Max Point
Frequency
Limit
Marker
Add Min Point
Frequency
Limit
Marker
3
Delete Limit
Delete all Limits
1. The active measurement channel configuration determines the order of appearance
and the content of the softkey menus.
2. Limit segments are numbered by the instrument as they are entered. At the same
time the Limit menu is displayed, the currently defined limits are displayed.
3. Select the limit with the
play, and select
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Functions, 8712ET/ES and 8714ET/ES (2 of 5)
DISPLAY
CALC[1|2]:LIM:SEGM[n]:TYPE LMIN;STAT ON
CALC[1|2]:LIM:SEGM[n]:FREQ:STAR <num> HZ
CALC[1|2]:LIM:SEGM[n]:FREQ:STOP <num> HZ
CALC[1|2]:LIM:SEGM[n]:AMPL:STAR <num>
CALC[1|2]:LIM:SEGM[n]:AMPL:STOP <num>
CALC[1|2]:MARK1:X <num>
CALC[1|2]:LIM:SEGM[n]:TYPE PMAX;STAT ON
CALC[1|2]:LIM:SEGM[n]:FREQ:STAR <num> HZ
CALC[1|2]:LIM:SEGM[n]:AMPL:STAR <num>
CALC[1|2]:MARK1:X <num>
CALC[1|2]:LIM:SEGM[n]:TYPE PMIN;STAT ON
CALC[1|2]:LIM:SEGM[n]:FREQ:STAR <num> HZ
CALC[1|2]:LIM:SEGM[n]:AMPL:STAR <num>
CALC[1|2]:MARK1:X <num>
(menu selection only)
CALC1:LIM:DISP [ON|OFF]
and
up
down
.
Delete Limit
10-32
SCPI COMMAND
keys or the RPG knob on the Limit Menu dis-
2
2
2
Programmer's Guide