JR ProPo DSX11 Operation Manual page 89

Flight MODE NAME (System Setting Mode)
It is possible to change the transmitter Flight Mode Names.
The Flight Mode basic names consist of six characters, and
it will be possible to change the names by using this
function.
In addition, 4-character short names are used when setting
functions in the Function Mode.
Situation where the Airplane Type has been Selected
Display when Setting the Flight Mode Name
Displayed Character Selection Setting Method
By using the dial to match the arrow to the position where
you wish to input the name, then pressing the dial, the
screen will be set to the Character Input condition.
Rotate the dial to select the characters. Pressing the NEXT
key moves forward one character, while pressing the
DOWN key moves the character selection cursor down one
line.
Once the input has been completed, press the OK key.
Situation where the Helicopter Type has been Selected
Situation where the Glider Type has been Selected
Flight Mode Name Setting Method
By using the dial to match the cursor to the position where
you wish to input the name, then pressing the dial, the
screen will be set to the Character Input condition. Rotate
the dial to select the characters.
Pressing the OK key will complete the input.
Short Name (4 characters)
Long Name (6 characters)
Flight Mode 0
Flight Mode 1
Flight Mode 2
Normal Mode
Stunt Mode 1
Stunt Mode 2
Stunt Mode 3
Stunt Mode 4
Hold
Cruise Mode
Speed Mode
Thermal Mode
Launch Mode
Landing Mode