Rudd → Spoi - JR ProPo DSX11 Operation Manual

RUDD→SPOI mix
This function will enable mixing to be applied to allow the
spoilers to be used as a drag rudder in the situation of a
tailless glider where the aircraft does not have a rudder.
Further, even in normal gliders, by linking the spoilers to
the rudder operation it will become easier to turn the
Current Mode
Setting Method
First, rotate the dial to highlight the numerical value display
part of the Flight Mode that you wish to set, then press the
dial which will enclose the amount by a border. By rotating
the dial in this condition, the setting amount can be
increased and decreased.
aircraft.
In order to use this function, "Dual SPOI" should be set in
Wing Type (System Setting Mode). Settings can only be
carried out when there are dual spoilers.
Flight Mode Position
Spoiler Linkage Amount (0 to 100%)
Once the numerical value has been determined, press the
dial once more.
Pressing the key in the Numerical Value Setting condi-
tion will return the mixing amount to the initial value (0%).