JR ProPo DSX11 Operation Manual page 71

MOTOR SYSTEM
This function can be set in situations except when the
Motor (MOTO) channel has been selected as "MATE" in
DUAL-Wing. When the MOTO channel is set to INH, this
function will only function as the Program Mixing Master.
Delay Time
Setting Method
First, rotate the dial to highlight the HOLD POSITION value
display. After pressing the dial in this condition it will
become possible to increase and decrease the numerical
values.
Once the numerical values have been determined, press
the dial once more. This will return to the Item Selection
condition.
The Hold Position value will be the position in the Hold
condition, which will have a variable width between -10 and
+100%.
Item Selection Condition
Press the dial.
Numerical Value Setting Condition
(-10 to 100%)
Current Condition
Hold ON/OFF
Hold Position (-10 to 100%)
By rotating the dial, it will be
possible to increase and
decrease the numerical values.
Using the key, the value
can be set to the preset (0%).
This function sets the Motor Hold Position, and whether the
Hold operation will be effective in each Flight Mode and
Switch condition.
Switch Selection
Switches that can be selected
Operation Switch Selection Method
By highlighting SW SEL and clicking the dial, the switches
that are capable of being set at that time will be displayed.
Hold Delay
By using this function, it will be possible to set a delay time
so that the switching ON and OFF of Hold can be carried
out gently.
Press the dial.
Possible to set between 0.1 and 2.0 seconds.