Table of Contents
Advertisement
(1) Function Mode (When HELICOPTER type is selected)
Press the
key during normal screen mode to change
to the function mode's list display screen. Turn the dial
from this display to highlight the function to be set. When
the
key or the dial is pressed (clicked) at this state, it
will change to the function's screen which was selected
from the list.
Also, when the
key is pressed during normal screen
mode, it will change to the My List screen.
The airplane can fly during this function mode even when
the mixing volume needs to be adjusted during a flight. It
1.D/R&EXP
2.TRAVEL ADJ.
7.THRO CURVE
10.THRO HOLD
17.MIX → THRO
18.F-MODE DELAY
19.STICK POS SW
will return to the normal screen mode by pressing the
key during this mode. (INFO can be selected with a dial to
return to normal screen mode.)
Refer to the after-mentioned description for how to set
each function. If a wrong function display is displayed,
confirm whether AIRPLANE or GLIDER is not selected at
type selection function (system setting mode).
Also, the following display is a state in which all the items
can be set.
P.20
P.21
P.21
P.22
P.22
P.23
P.24
P.26
P.28
P.29
P.30
P.31
P.32
P.34
P.34
P.35
P.37
P.37
P.38
P.39
P.40
P.40
Hide quick links:
Advertisement
Table of Contents
