Installing Office Phonemail - Siemens Hicom Office PhoneMail Installation And System Administrator's Manual

4. Position the mounting clasps on the back surface of the Office PhoneMail unit over the cor-
responding mounting screw heads and lower the unit until it locks into position as shown
in Figure 5-3.
Figure 5-3 Mounting Office PhoneMail
5.4 Connecting Office PhoneMail to the Hicom Unit
Now that you have mounted your Office PhoneMail system, you need to connect it to your Hi-
com. This connection is illustrated in Figure 5-4 on page 5-6.
G281-0507-00, April 15, 1998
Hicom Office PhoneMail, Version 1, Installation and System Administration Guide

Installing Office PhoneMail

Connecting Office PhoneMail to the Hicom Unit
ac Power
lleg_sa.c05
Mounting
Screws
5-5