Mounting Dimensions Of The External Bop - Siemens SINAMICS V20 Operating Instructions Manual

Options and spare parts
B.1 Options
See the following table for settable baudrate and address values. To change the baudrate,
set P2010[0]. To change the USS communication address, set P2011[0].
Baudrate
(bps)
9600
19200
38400
57600
76800
93750
115200
In case of any communication errors, the screen displays "noCon" which means that no
communication connection has been detected. The inverter then automatically restarts
baudrate and address detection. In this case, check that the cable is correctly connected.

Mounting dimensions of the external BOP

The outline dimensions, drill pattern and cut-out dimensions of the external BOP are shown
below:
Unit: mm
308
Communication address
0 ... 31
0 ... 31
0 ... 31
0 ... 31
0 ... 31
0 ... 31
0 ... 31
Display example
Fixings:
4 x M3 screws (length: 12 mm to 18 mm)
Tightening torque: 0.8 Nm ± 10%
Operating Instructions, 09/2014, A5E34559884
SINAMICS V20 Inverter