Inverter Menu Structure; Inverter Status Icons - Siemens SINAMICS V20 Operating Instructions Manual

When navigating through a menu, it moves the selection up through the screens available.
•
When editing a parameter value, it increases the displayed value.
•
When the inverter is in RUN mode, it increases the speed.
•
Long press (> 2 s) of the key quickly scrolls up through parameter numbers, indices, or values.
•
When navigating through a menu, it moves the selection down through the screens available.
•
When editing a parameter value, it decreases the displayed value.
•
When the inverter is in RUN mode, it decreases the speed.
•
Long press (> 2 s) of the key quickly scrolls down through parameter numbers, indices, or values.
•
Reverses the direction of rotation of the motor. Pressing the two keys once activates reverse motor rota-
tion. Pressing the two keys once again deactivates reverse rotation of the motor. The reserve icon (
+
on the display indicates that the output speed is opposite to the setpoint.
Note
Otherwise specified, operations of the above keys always indicate short press (< 2 s).

Inverter status icons

Inverter has at least one pending fault.
Inverter has at least one pending alarm.
:
(flashing):
Motor rotates in the reversed direction.
:
(flashing):
5.1.2

Inverter menu structure

Menu
50/60 Hz selection menu
Main menu
Display menu (default display)
Setup menu
Parameter menu
SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Inverter is running (motor speed may be 0 rpm).
Inverter may be energized unexpectedly (for example, in frost protection
mode).
Inverter is in HAND mode.
Inverter is in JOG mode.
Description
This menu is visible only on first power-up or after a factory
reset.
Basic monitoring view of key parameters such as frequen-
cy, voltage, current, DC-link voltage, and so on.
Access to parameters for quick commissioning of the in-
verter system.
Access to all available inverter parameters.
5.1 The built-in Basic Operator Panel (BOP)
Commissioning
)
51