4.3
EMC-compliant installation
EMC-compliant installation of the inverter
The shield connection kit is supplied as an option for each frame size (For more information
about this option, see Appendix "Shield connection kits (Page 333)".). It allows easy and
efficient connection of the necessary shield to achieve EMC-compliant installation of the
inverter. If no shield connection kit is used, you can alternatively mount the device and
additional components on a metal mounting plate with excellent electrical conductivity and a
large contact area. This mounting plate must be connected to the cabinet panel and the PE
or EMC bus bar.
The following diagram shows an example of EMC-compliant installation of the inverter frame
size B/C.
SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Electrical installation
4.3 EMC-compliant installation
45