Siemens SINAMICS V20 Operating Instructions Manual page 258

Parameter list
7.2 Parameter list
Parameter Function
0
1
Dependency: All active function blocks will be calculated in every 128 ms, fast free function blocks in every 8 ms.
P2801[0...16] Activate FFBs
P2801 and P2802 respectively, enable each free function block individually (P2801[x] > 0 or P2802[x] >
0). In addition, P2801 and P2802 determine the chronological order of each function block by setting the
level in which the free function block will work.
The following table shows that the priority decreases from right to left and from top to bottom.
0
1
2
...
6
Example: P2801[3] = 2, P2801[4] = 2, P2802[3] = 3, P2802[4] = 2
FFBs will be calculated in following order: P2802[3], P2801[3] , P2801[4], P2802[4]
Index: [0]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
258
Range Factory Can be
default changed
Disable
Enable
0 - 6 0 U, T
Not Active
Level 1
Level 2
...
Level 6
Enable AND 1
Enable AND 2
Enable AND 3
Enable OR 1
Enable OR 2
Enable OR 3
Enable XOR 1
Enable XOR 2
Enable XOR 3
Enable NOT 1
Enable NOT 2
Scaling Data
set
- -
SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Data Acc.
type Level
U16 3